usNetworkGrabberRF3D Class Reference

#include <visp3/ustk_grabber/usNetworkGrabberRF3D.h>

Inheritance diagram for usNetworkGrabberRF3D:

Public Types
enum	usDataPositionInBuffer { OUTPUT_FRAME_POSITION_IN_VEC = 0 , MOST_RECENT_FRAME_POSITION_IN_VEC = 1 , CURRENT_FILLED_FRAME_POSITION_IN_VEC = 2 }
enum	usVolumeField { ODD = 0 , EVEN = 1 , ODD_EVEN = 2 }

Public Slots
void	center3DProbeMotor ()
void	connected ()
void	connectToServer ()
void	connectToServer (QHostAddress address)
void	disconnected ()
void	disconnectFromServer ()
void	handleError (QAbstractSocket::SocketError err)
void	initAcquisitionSlot (usNetworkGrabber::usInitHeaderSent header)
void	processConnectionToServer ()
void	runAcquisition ()
void	stopAcquisition ()

Signals
void	newVolumeAvailable ()
void	serverUpdateEnded (bool success)
void	endBlockingLoop ()
void	runAcquisitionSignal (bool run)
void	sendAcquisitionParametersSignal ()
void	endConnection ()
void	acquisitionInitialized (bool)

Public Member Functions
	usNetworkGrabberRF3D (usNetworkGrabber *parent=0)
	~usNetworkGrabberRF3D ()
void	activateRecording (std::string path)
usVolumeGrabbedInfo< usImageRF3D< short int > > *	acquire ()
void	dataArrived ()
bool	isFirstFrameAvailable ()
void	setVolumeField (usVolumeField volumeField)
void	stopRecording ()
void	disconnect ()
bool	initAcquisition (const usNetworkGrabber::usInitHeaderSent &header)
bool	getMotorActivation ()
usAcquisitionParameters::usMotorStep	getStepsPerFrame ()
int	getFramesPerVolume ()
int	getImageDepth ()
int	getImagingMode ()
int	getMotorPosition ()
int	getPostScanHeigh ()
bool	getPostScanMode ()
int	getPostScanWidth ()
int	getSamplingFrequency ()
int	getSector ()
int	getTransmitFrequency ()
void	readAcquisitionParameters (QDataStream &stream)
bool	sendAcquisitionParameters ()
void	setIPAddress (const std::string &s_ip)
void	setMotorActivation (bool activateMotor)
void	setStepsPerFrame (usAcquisitionParameters::usMotorStep stepsPerFrame)
void	setFramesPerVolume (int framesPerVolume)
void	setImageDepth (int imageDepth)
void	setImagingMode (int imagingMode)
void	setMotorPosition (int motorPosition)
void	setPostScanHeigh (int postScanHeigh)
void	setPostScanMode (bool postScanMode)
void	setPostScanWidth (int postScanWidth)
void	setSamplingFrequency (int samplingFrequency)
void	setSector (int sector)
void	setTransmitFrequency (int transmitFrequency)
void	setVerbose (bool verbose)

Protected Slots
void	serverUpdated (bool sucess)
void	sendRunSignal (bool run)
void	sendAcquisitionParametersSlot ()

Protected Member Functions
void	includeFrameInVolume ()

Protected Attributes
bool	m_verbose
QTcpSocket *	m_tcpSocket
bool	m_connect
std::string	m_ip
int	m_bytesLeftToRead
usAcquisitionParameters	m_acquisitionParameters
bool	m_updateParametersSucess
usInitHeaderConfirmation	m_confirmHeader
us::usImageHeader	m_imageHeader
bool	m_isInit
bool	m_isRunning
QThread *	m_thread

Detailed Description

Specific class to grab RF volumes from the ultrasound station on the network.

The following figure details the network communication process and summarizes the steps to follow to acquire ultrasound images:

This grabber manages a buffer system to avoid multiple copy of the volumes. The acquire() method returns you a pointer on a new volume, you can acess and modify the volume (it is thread-safe). Acquire() can be blocking, the behaviour depends on how often you call it:

• If you call acquire() faster than the volumes are arriving on the network, it is blocking to wait next volume coming.
• If you call it slower you will loose volumes, but you will get the last volume available.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, and tutorial-ustk-virtual-server-RF3D.cpp.

Definition at line 70 of file usNetworkGrabberRF3D.h.

Member Enumeration Documentation

usDataPositionInBuffer

enum usNetworkGrabber::usDataPositionInBuffer

inherited

Enumerator
OUTPUT_FRAME_POSITION_IN_VEC
MOST_RECENT_FRAME_POSITION_IN_VEC
CURRENT_FILLED_FRAME_POSITION_IN_VEC

Definition at line 75 of file usNetworkGrabber.h.

usVolumeField

enum usNetworkGrabber::usVolumeField

inherited

Enum to specify types of volumes to grab

Enumerator
ODD	Grab only odd volumes
EVEN	Grab only even volumes
ODD_EVEN	Grab every volumes

Definition at line 82 of file usNetworkGrabber.h.

Constructor & Destructor Documentation

usNetworkGrabberRF3D()

usNetworkGrabberRF3D::usNetworkGrabberRF3D ( usNetworkGrabber *  parent = 0 )

explicit

Constructor. Inititializes the image, and manages Qt signal.

Definition at line 43 of file usNetworkGrabberRF3D.cpp.

References dataArrived(), usImageRF2D< Type >::init(), usNetworkGrabber::m_tcpSocket, and usNetworkGrabber::ODD_EVEN.

~usNetworkGrabberRF3D()

usNetworkGrabberRF3D::~usNetworkGrabberRF3D

(

)

Destructor.

Definition at line 66 of file usNetworkGrabberRF3D.cpp.

Member Function Documentation

acquire()

usVolumeGrabbedInfo< usImageRF3D< short int > > * usNetworkGrabberRF3D::acquire

(

)

Method to get the last frame received. The grabber is designed to avoid data copy (it is why you get a pointer on the data).

Note

This method is designed to be thread-safe, you can call it from another thread.

Warning

Make sure to lock the usFrameGrabbedInfo::mutex when you access/modify usFrameGrabbedInfo::frameCount attribute, wich is acessed in this method.

Returns

Pointer to the last frame acquired.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, and tutorial-ustk-virtual-server-RF3D.cpp.

Definition at line 319 of file usNetworkGrabberRF3D.cpp.

References usNetworkGrabber::EVEN, usNetworkGrabber::MOST_RECENT_FRAME_POSITION_IN_VEC, newVolumeAvailable(), usNetworkGrabber::ODD, and usNetworkGrabber::OUTPUT_FRAME_POSITION_IN_VEC.

acquisitionInitialized

void usNetworkGrabber::acquisitionInitialized ( bool  )

signalinherited

Referenced by usNetworkGrabber::initAcquisitionSlot().

activateRecording()

void usNetworkGrabberRF3D::activateRecording

(

std::string

path

)

Method to record the sequence received, to replay it later with the virtual server for example.

Parameters

path	The path where the sequence will be saved.

Examples

tutorial-elastography-3D-acquisition.cpp.

Definition at line 364 of file usNetworkGrabberRF3D.cpp.

References usMHDSequenceWriter::setSequenceDirectory().

center3DProbeMotor

void usNetworkGrabber::center3DProbeMotor ( )

slotinherited

Sets the motor position of 4DC7 probe to the middle.

Definition at line 768 of file usNetworkGrabber.cpp.

References usNetworkGrabber::sendAcquisitionParameters(), and usNetworkGrabber::setMotorPosition().

connected

void usNetworkGrabber::connected ( )

slotinherited

Slot called when the grabber is connected to the server. Prints connection informations.

Definition at line 165 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_tcpSocket, and usNetworkGrabber::m_verbose.

Referenced by usNetworkGrabber::processConnectionToServer().

connectToServer [1/2]

void usNetworkGrabber::connectToServer ( )

slotinherited

Method used to connect to the server.

Examples

tutorial-elastography-2D-separate-displays.cpp, tutorial-elastography-2D.cpp, tutorial-elastography-3D-acquisition.cpp, tutorial-elastography-BMA-2D.cpp, tutorial-local-grabbing-elastography-display.cpp, tutorial-local-grabbing-pre-scan2D-display.cpp, tutorial-ultrasonix-qt-grabbing-RF-scan-conversion.cpp, tutorial-ultrasonix-qt-grabbing-RF.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp, tutorial-ultrasonix-servo-target-confidence.cpp, tutorial-ustk-virtual-server-RF2D.cpp, tutorial-ustk-virtual-server-RF3D.cpp, tutorial-ustk-virtual-server-postScan2D.cpp, tutorial-ustk-virtual-server-preScan2D.cpp, and tutorial-ustk-virtual-server-preScan3D.cpp.

Definition at line 96 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_connect, and usNetworkGrabber::processConnectionToServer().

connectToServer [2/2]

void usNetworkGrabber::connectToServer ( QHostAddress  address )

slotinherited

Method used to connect to the server.

Definition at line 105 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_connect, usNetworkGrabber::processConnectionToServer(), and usNetworkGrabber::setIPAddress().

dataArrived()

void usNetworkGrabberRF3D::dataArrived ( )

virtual

Slot called when data is coming on the network. Manages the type of data which is coming and read it. Emits newFrameArrived signal when a whole frame is available.

Implements usNetworkGrabber.

Definition at line 72 of file usNetworkGrabberRF3D.cpp.

References us::usImageHeader::anglePerFr, us::usImageHeader::dataLength, us::usImageHeader::dataRate, us::usImageHeader::frameCount, us::usImageHeader::frameHeight, us::usImageHeader::framesPerVolume, us::usImageHeader::frameWidth, usImageRF2D< Type >::getNumberOfPixel(), usFrameGrabbedInfo< Type >::getTimeStamp(), us::usImageHeader::headerId, usNetworkGrabber::usInitHeaderConfirmation::headerId, us::usImageHeader::imageDepth, us::usImageHeader::imageType, includeFrameInVolume(), usNetworkGrabber::usInitHeaderConfirmation::initOk, usMotorSettings::LinearMotor, usNetworkGrabber::m_bytesLeftToRead, usNetworkGrabber::m_confirmHeader, usNetworkGrabber::m_imageHeader, usNetworkGrabber::m_tcpSocket, usNetworkGrabber::m_verbose, us::usImageHeader::motorRadius, us::usImageHeader::motorType, us::usImageHeader::pixelHeight, us::usImageHeader::pixelWidth, usNetworkGrabber::usInitHeaderConfirmation::probeId, usNetworkGrabber::readAcquisitionParameters(), usImageRF2D< Type >::resize(), usMotorSettings::RotationalMotor, us::usImageHeader::samplingFrequency, us::usImageHeader::scanLineNumber, us::usImageHeader::scanLinePitch, usNetworkGrabber::serverUpdateEnded(), usImagePreScanSettings::setAxialResolution(), usTransducerSettings::setDepth(), usFrameGrabbedInfo< Type >::setFrameCount(), usMotorSettings::setFrameNumber(), usMotorSettings::setFramePitch(), usFrameGrabbedInfo< Type >::setFramesPerVolume(), usMotorSettings::setMotorRadius(), usMotorSettings::setMotorType(), usTransducerSettings::setSamplingFrequency(), usTransducerSettings::setScanLinePitch(), usFrameGrabbedInfo< Type >::setTimeStamp(), usTransducerSettings::setTransducerConvexity(), usTransducerSettings::setTransducerRadius(), usTransducerSettings::setTransmitFrequency(), us::usImageHeader::ss, usMotorSettings::TiltingMotor, us::usImageHeader::timeStamp, us::usImageHeader::transducerRadius, and us::usImageHeader::transmitFrequency.

Referenced by usNetworkGrabberRF3D().

disconnect()

void usNetworkGrabber::disconnect ( )

inherited

Method to close the connection.

Examples

tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp.

Definition at line 293 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_tcpSocket.

disconnected

void usNetworkGrabber::disconnected ( )

slotinherited

Slot called when the grabber is disconnected from the server. Prints information, and closes socket.

Definition at line 179 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_tcpSocket, and usNetworkGrabber::m_verbose.

Referenced by usNetworkGrabber::disconnectFromServer(), and usNetworkGrabber::processConnectionToServer().

disconnectFromServer

void usNetworkGrabber::disconnectFromServer ( )

slotinherited

Method used to disconnect from the server.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-local-grabbing-elastography-display.cpp, and tutorial-local-grabbing-pre-scan2D-display.cpp.

Definition at line 115 of file usNetworkGrabber.cpp.

References usNetworkGrabber::disconnected(), usNetworkGrabber::endConnection(), usNetworkGrabber::m_connect, and usNetworkGrabber::m_tcpSocket.

endBlockingLoop

void usNetworkGrabber::endBlockingLoop ( )

signalinherited

Referenced by usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), usNetworkGrabber::sendAcquisitionParametersSlot(), and usNetworkGrabber::serverUpdated().

endConnection

void usNetworkGrabber::endConnection ( )

signalinherited

Referenced by usNetworkGrabber::disconnectFromServer(), and usNetworkGrabber::processConnectionToServer().

getFramesPerVolume()

int usNetworkGrabber::getFramesPerVolume ( )

inherited

Getter for the number of frames per volume, in 3D acquisition.

Definition at line 718 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getFramesPerVolume(), and usNetworkGrabber::m_acquisitionParameters.

getImageDepth()

int usNetworkGrabber::getImageDepth ( )

inherited

Getter for image depth (meters).

Definition at line 723 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getImageDepth(), and usNetworkGrabber::m_acquisitionParameters.

getImagingMode()

int usNetworkGrabber::getImagingMode ( )

inherited

Getter for imaging mode (0 : B-Mode, 12 : RF).

Definition at line 728 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getImagingMode(), and usNetworkGrabber::m_acquisitionParameters.

getMotorActivation()

bool usNetworkGrabber::getMotorActivation ( )

inherited

Getter for motor activation : true to sweep the motor the motor during the acquisition, false to let it static.

Definition at line 705 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getActivateMotor(), and usNetworkGrabber::m_acquisitionParameters.

getMotorPosition()

int usNetworkGrabber::getMotorPosition ( )

inherited

Getter for a static motor position (in angle from the beginning position).

Definition at line 733 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getMotorPosition(), and usNetworkGrabber::m_acquisitionParameters.

getPostScanHeigh()

int usNetworkGrabber::getPostScanHeigh ( )

inherited

Getter for post-scan image height.

Definition at line 738 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getPostScanHeigh(), and usNetworkGrabber::m_acquisitionParameters.

getPostScanMode()

bool usNetworkGrabber::getPostScanMode ( )

inherited

Getter for post-scan mode : true for post-scan, false for pre-scan.

Definition at line 743 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getPostScanMode(), and usNetworkGrabber::m_acquisitionParameters.

getPostScanWidth()

int usNetworkGrabber::getPostScanWidth ( )

inherited

Getter for post-scan image width.

Definition at line 748 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getPostScanWidth(), and usNetworkGrabber::m_acquisitionParameters.

getSamplingFrequency()

int usNetworkGrabber::getSamplingFrequency ( void  )

inherited

Getter for samplingFrequency (Hz).

Definition at line 753 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getSamplingFrequency(), and usNetworkGrabber::m_acquisitionParameters.

getSector()

int usNetworkGrabber::getSector ( )

inherited

Getter for sector (percentage of the number of transducers to use).

Definition at line 758 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getSector(), and usNetworkGrabber::m_acquisitionParameters.

getStepsPerFrame()

usAcquisitionParameters::usMotorStep usNetworkGrabber::getStepsPerFrame ( )

inherited

Getter for steps between two sucessive frames (angle). See usAcquisitionParameters::usMotorSteps

Definition at line 710 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getSepsPerFrame(), and usNetworkGrabber::m_acquisitionParameters.

getTransmitFrequency()

int usNetworkGrabber::getTransmitFrequency ( )

inherited

Getter for transmitFrequency (Hz).

Definition at line 763 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getTransmitFrequency(), and usNetworkGrabber::m_acquisitionParameters.

handleError

void usNetworkGrabber::handleError ( QAbstractSocket::SocketError  err )

slotinherited

Slot called if there is an error (or disruption) in the connection. Throws an exception and prints the error.

Definition at line 189 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_tcpSocket.

Referenced by usNetworkGrabber::processConnectionToServer().

includeFrameInVolume()

void usNetworkGrabberRF3D::includeFrameInVolume ( )

protected

Method to include the frame grabbed in the right volume.

Definition at line 232 of file usNetworkGrabberRF3D.cpp.

References usNetworkGrabber::CURRENT_FILLED_FRAME_POSITION_IN_VEC, usImagePreScanSettings::getAxialResolution(), usTransducerSettings::getDepth(), usFrameGrabbedInfo< Type >::getFrameCount(), usMotorSettings::getFrameNumber(), usFrameGrabbedInfo< Type >::getFramesPerVolume(), usImageRF2D< Type >::getHeight(), usTransducerSettings::getScanLineNumber(), usTransducerSettings::getScanLinePitch(), usFrameGrabbedInfo< Type >::getTimeStamp(), usTransducerSettings::getTransducerRadius(), usImageRF2D< Type >::getWidth(), usNetworkGrabber::MOST_RECENT_FRAME_POSITION_IN_VEC, newVolumeAvailable(), usNetworkGrabber::OUTPUT_FRAME_POSITION_IN_VEC, and usMHDSequenceWriter::write().

Referenced by dataArrived().

initAcquisition()

bool usNetworkGrabber::initAcquisition ( const usNetworkGrabber::usInitHeaderSent &  header )

inherited

Method called to init the ultrasonix station, by passing acquisition parameters. It is a blocking method : we wait the answer of the server to know if init was sucessfull.

Parameters

header

Contains acquisition parameters to set up for the acquisition.

Returns

Boolean to say if init was sucessfull (true) or not (false).

See also

usNetworkGrabber::usInitHeaderSent

Examples

tutorial-elastography-2D-separate-displays.cpp, tutorial-elastography-2D.cpp, tutorial-elastography-3D-acquisition.cpp, tutorial-elastography-BMA-2D.cpp, tutorial-local-grabbing-elastography-display.cpp, tutorial-local-grabbing-pre-scan2D-display.cpp, tutorial-ultrasonix-qt-grabbing-RF-scan-conversion.cpp, tutorial-ultrasonix-qt-grabbing-RF.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp, tutorial-ultrasonix-servo-target-confidence.cpp, tutorial-ustk-virtual-server-RF2D.cpp, tutorial-ustk-virtual-server-RF3D.cpp, tutorial-ustk-virtual-server-postScan2D.cpp, tutorial-ustk-virtual-server-preScan2D.cpp, and tutorial-ustk-virtual-server-preScan3D.cpp.

Definition at line 206 of file usNetworkGrabber.cpp.

References usNetworkGrabber::endBlockingLoop(), usNetworkGrabber::usInitHeaderSent::headerId, usNetworkGrabber::usInitHeaderSent::imagingMode, usNetworkGrabber::m_isInit, usNetworkGrabber::m_isRunning, usNetworkGrabber::m_tcpSocket, usNetworkGrabber::m_updateParametersSucess, usNetworkGrabber::m_verbose, usNetworkGrabber::usInitHeaderSent::probeId, usNetworkGrabber::usInitHeaderSent::slotId, and usNetworkGrabber::stopAcquisition().

initAcquisitionSlot

void usNetworkGrabber::initAcquisitionSlot ( usNetworkGrabber::usInitHeaderSent  header )

slotinherited

Slot to call to init the ultrasonix station, by passing acquisition parameters. It is a blocking method : we wait the answer of the server to know if init was sucessfull.

Returns

Boolean to say if init was sucessfull (true) or not (false).

See also

usNetworkGrabber::usInitHeaderSent

Definition at line 251 of file usNetworkGrabber.cpp.

References usNetworkGrabber::acquisitionInitialized(), usNetworkGrabber::endBlockingLoop(), usNetworkGrabber::usInitHeaderSent::headerId, usNetworkGrabber::usInitHeaderSent::imagingMode, usNetworkGrabber::m_isInit, usNetworkGrabber::m_isRunning, usNetworkGrabber::m_tcpSocket, usNetworkGrabber::m_updateParametersSucess, usNetworkGrabber::m_verbose, usNetworkGrabber::usInitHeaderSent::probeId, usNetworkGrabber::usInitHeaderSent::slotId, and usNetworkGrabber::stopAcquisition().

isFirstFrameAvailable()

bool usNetworkGrabberRF3D::isFirstFrameAvailable ( )

inline

Examples

tutorial-elastography-3D-acquisition.cpp, and tutorial-ustk-virtual-server-RF3D.cpp.

Definition at line 83 of file usNetworkGrabberRF3D.h.

newVolumeAvailable

void usNetworkGrabberRF3D::newVolumeAvailable ( )

signal

Referenced by acquire(), and includeFrameInVolume().

processConnectionToServer

void usNetworkGrabber::processConnectionToServer ( )

slotinherited

Method used to do all the process of the server connection.

Definition at line 129 of file usNetworkGrabber.cpp.

References usNetworkGrabber::connected(), usNetworkGrabber::disconnected(), usNetworkGrabber::endConnection(), usNetworkGrabber::handleError(), usNetworkGrabber::m_connect, usNetworkGrabber::m_ip, usNetworkGrabber::m_tcpSocket, and usNetworkGrabber::m_verbose.

Referenced by usNetworkGrabber::connectToServer().

readAcquisitionParameters()

void usNetworkGrabber::readAcquisitionParameters ( QDataStream &  stream )

inherited

Method to read all parameters comming from the server (in answer to an update). It fills the usNetworkGrabber attribute.

Definition at line 383 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_acquisitionParameters, usNetworkGrabber::m_verbose, usAcquisitionParameters::setActivateMotor(), usAcquisitionParameters::setFramesPerVolume(), usAcquisitionParameters::setFramesPerVolumeMax(), usAcquisitionParameters::setImageDepth(), usAcquisitionParameters::setImageDepthMax(), usAcquisitionParameters::setImageDepthMin(), usAcquisitionParameters::setImagingMode(), usAcquisitionParameters::setImagingModeMax(), usAcquisitionParameters::setImagingModeMin(), usAcquisitionParameters::setMotorPosition(), usAcquisitionParameters::setMotorPositionMax(), usAcquisitionParameters::setMotorPositionMin(), usAcquisitionParameters::setPostScanHeigh(), usAcquisitionParameters::setPostScanMode(), usAcquisitionParameters::setPostScanWidth(), usAcquisitionParameters::setSamplingFrequency(), usAcquisitionParameters::setSamplingFrequencyMax(), usAcquisitionParameters::setSamplingFrequencyMin(), usAcquisitionParameters::setSector(), usAcquisitionParameters::setSectorMax(), usAcquisitionParameters::setSectorMin(), usAcquisitionParameters::setSepsPerFrame(), usAcquisitionParameters::setSepsPerFrameMax(), usAcquisitionParameters::setSepsPerFrameMin(), usAcquisitionParameters::setTransmitFrequency(), usAcquisitionParameters::setTransmitFrequencyMax(), usAcquisitionParameters::setTransmitFrequencyMin(), usAcquisitionParameters::US_ANGLE_PITCH_1, usAcquisitionParameters::US_ANGLE_PITCH_2, usAcquisitionParameters::US_ANGLE_PITCH_3, usAcquisitionParameters::US_ANGLE_PITCH_4, usAcquisitionParameters::US_ANGLE_PITCH_5, and usAcquisitionParameters::US_STATIC_MOTOR.

Referenced by usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), and dataArrived().

runAcquisition

void usNetworkGrabber::runAcquisition ( )

slotinherited

Sends the command to run the acquisition on the ultrasound station and start a new thread to run the data reception

Examples

tutorial-elastography-2D-separate-displays.cpp, tutorial-elastography-2D.cpp, tutorial-elastography-3D-acquisition.cpp, tutorial-elastography-BMA-2D.cpp, tutorial-local-grabbing-elastography-display.cpp, tutorial-local-grabbing-pre-scan2D-display.cpp, tutorial-ultrasonix-qt-grabbing-RF-scan-conversion.cpp, tutorial-ultrasonix-qt-grabbing-RF.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp, tutorial-ultrasonix-servo-target-confidence.cpp, tutorial-ustk-virtual-server-RF2D.cpp, tutorial-ustk-virtual-server-RF3D.cpp, tutorial-ustk-virtual-server-postScan2D.cpp, tutorial-ustk-virtual-server-preScan2D.cpp, and tutorial-ustk-virtual-server-preScan3D.cpp.

Definition at line 651 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_thread, and usNetworkGrabber::runAcquisitionSignal().

runAcquisitionSignal

void usNetworkGrabber::runAcquisitionSignal ( bool  run )

signalinherited

Referenced by usNetworkGrabber::runAcquisition(), usNetworkGrabber::stopAcquisition(), and usNetworkGrabber::usNetworkGrabber().

sendAcquisitionParameters()

bool usNetworkGrabber::sendAcquisitionParameters ( )

inherited

Method to send to the server the new acquisition parameters.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp, and tutorial-ultrasonix-servo-target-confidence.cpp.

Definition at line 298 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_isRunning, usNetworkGrabber::m_updateParametersSucess, usNetworkGrabber::sendAcquisitionParametersSignal(), and usNetworkGrabber::stopAcquisition().

Referenced by usNetworkGrabber::center3DProbeMotor().

sendAcquisitionParametersSignal

void usNetworkGrabber::sendAcquisitionParametersSignal ( )

signalinherited

Referenced by usNetworkGrabber::sendAcquisitionParameters(), and usNetworkGrabber::usNetworkGrabber().

sendAcquisitionParametersSlot

void usNetworkGrabber::sendAcquisitionParametersSlot ( )

protectedslotinherited

Slot to send to the server the new acquisition parameters.

Definition at line 312 of file usNetworkGrabber.cpp.

References usNetworkGrabber::endBlockingLoop(), usAcquisitionParameters::getActivateMotor(), usAcquisitionParameters::getFramesPerVolume(), usAcquisitionParameters::getImageDepth(), usAcquisitionParameters::getImagingMode(), usAcquisitionParameters::getMotorPosition(), usAcquisitionParameters::getPostScanHeigh(), usAcquisitionParameters::getPostScanMode(), usAcquisitionParameters::getPostScanWidth(), usAcquisitionParameters::getSamplingFrequency(), usAcquisitionParameters::getSector(), usAcquisitionParameters::getSepsPerFrame(), usAcquisitionParameters::getTransmitFrequency(), usNetworkGrabber::m_acquisitionParameters, usNetworkGrabber::m_tcpSocket, usNetworkGrabber::m_updateParametersSucess, and usNetworkGrabber::m_verbose.

Referenced by usNetworkGrabber::usNetworkGrabber().

sendRunSignal

void usNetworkGrabber::sendRunSignal ( bool  run )

protectedslotinherited

Slot called to write on the socket the command run / stop.

Parameters

run	Boolean to run the acquisition (true), or stop it (false).

Definition at line 680 of file usNetworkGrabber.cpp.

References usNetworkGrabber::usRunControlHeaderSent::headerId, usNetworkGrabber::m_isRunning, usNetworkGrabber::m_tcpSocket, and usNetworkGrabber::usRunControlHeaderSent::run.

Referenced by usNetworkGrabber::usNetworkGrabber().

serverUpdated

void usNetworkGrabber::serverUpdated ( bool  sucess )

protectedslotinherited

Slot called when we get the answer from the server to our reques to update aquisition parameters.

Definition at line 373 of file usNetworkGrabber.cpp.

References usNetworkGrabber::endBlockingLoop(), and usNetworkGrabber::m_updateParametersSucess.

Referenced by usNetworkGrabber::usNetworkGrabber().

serverUpdateEnded

void usNetworkGrabber::serverUpdateEnded ( bool  success )

signalinherited

Referenced by usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), dataArrived(), and usNetworkGrabber::usNetworkGrabber().

setFramesPerVolume()

void usNetworkGrabber::setFramesPerVolume ( int  framesPerVolume )

inherited

Setter for the number of frames per volume, in 3D acquisition.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, and tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp.

Definition at line 558 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getFramesPerVolumeMax(), usAcquisitionParameters::getFramesPerVolumeMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setFramesPerVolume().

setImageDepth()

void usNetworkGrabber::setImageDepth ( int  imageDepth )

inherited

Setter for image depth (millimeters).

Examples

tutorial-ultrasonix-qt-grabbing-post-scan.cpp, and tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp.

Definition at line 571 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getImageDepthMax(), usAcquisitionParameters::getImageDepthMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setImageDepth().

setImagingMode()

void usNetworkGrabber::setImagingMode ( int  imagingMode )

inherited

Setter for imaging mode (0 : B-Mode, 12 : RF).

Definition at line 581 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getImagingModeMax(), usAcquisitionParameters::getImagingModeMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setImagingMode().

setIPAddress()

void usNetworkGrabber::setIPAddress ( const std::string &  s_ip )

inlineinherited

Examples

tutorial-elastography-2D-separate-displays.cpp, tutorial-elastography-2D.cpp, tutorial-elastography-BMA-2D.cpp, tutorial-local-grabbing-elastography-display.cpp, tutorial-local-grabbing-pre-scan2D-display.cpp, tutorial-ustk-virtual-server-RF2D.cpp, tutorial-ustk-virtual-server-RF3D.cpp, tutorial-ustk-virtual-server-postScan2D.cpp, tutorial-ustk-virtual-server-preScan2D.cpp, and tutorial-ustk-virtual-server-preScan3D.cpp.

Definition at line 155 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::connectToServer().

setMotorActivation()

void usNetworkGrabber::setMotorActivation ( bool  activateMotor )

inherited

Setter for motor activation : true to sweep the motor the motor during the acquisition, false to let it static.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, and tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp.

Definition at line 542 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setActivateMotor().

setMotorPosition()

void usNetworkGrabber::setMotorPosition ( int  motorPosition )

inherited

Setter for a static motor position (in angle from the beginning position).

Examples

tutorial-ultrasonix-qt-grabbing-post-scan.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan.cpp, and tutorial-ultrasonix-servo-target-confidence.cpp.

Definition at line 592 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getMotorPositionMax(), usAcquisitionParameters::getMotorPositionMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setMotorPosition().

Referenced by usNetworkGrabber::center3DProbeMotor().

setPostScanHeigh()

void usNetworkGrabber::setPostScanHeigh ( int  postScanHeigh )

inherited

Setter for post-scan image height.

Examples

tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, and tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp.

Definition at line 603 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setPostScanHeigh().

setPostScanMode()

void usNetworkGrabber::setPostScanMode ( bool  postScanMode )

inherited

Setter for post-scan mode : true for post-scan, false for pre-scan.

Examples

tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, and tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp.

Definition at line 608 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setPostScanMode().

setPostScanWidth()

void usNetworkGrabber::setPostScanWidth ( int  postScanWidth )

inherited

Setter for post-scan image width.

Examples

tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, and tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp.

Definition at line 613 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setPostScanWidth().

setSamplingFrequency()

void usNetworkGrabber::setSamplingFrequency ( int  samplingFrequency )

inherited

Setter for samplingFrequency (Hz).

Definition at line 618 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getSamplingFrequencyMax(), usAcquisitionParameters::getSamplingFrequencyMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setSamplingFrequency().

setSector()

void usNetworkGrabber::setSector ( int  sector )

inherited

Setter for sector (percentage of the number of transducers to use).

Definition at line 629 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getSectorMax(), usAcquisitionParameters::getSectorMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setSector().

setStepsPerFrame()

void usNetworkGrabber::setStepsPerFrame ( usAcquisitionParameters::usMotorStep  stepsPerFrame )

inherited

Setter for steps between two sucessive frames (angle). See usAcquisitionParameters::usMotorSteps

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan3D-display.cpp, and tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp.

Definition at line 550 of file usNetworkGrabber.cpp.

References usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setSepsPerFrame().

setTransmitFrequency()

void usNetworkGrabber::setTransmitFrequency ( int  transmitFrequency )

inherited

Setter for transmitFrequency (Hz).

Definition at line 639 of file usNetworkGrabber.cpp.

References usAcquisitionParameters::getTransmitFrequencyMax(), usAcquisitionParameters::getTransmitFrequencyMin(), usNetworkGrabber::m_acquisitionParameters, and usAcquisitionParameters::setTransmitFrequency().

setVerbose()

void usNetworkGrabber::setVerbose ( bool  verbose )

inlineinherited

Definition at line 170 of file usNetworkGrabber.h.

setVolumeField()

void usNetworkGrabberRF3D::setVolumeField

(

usNetworkGrabber::usVolumeField

volumeField

)

Set recording to specific volumes : odd, even or both.

Parameters

volumeField

Type of volume to acquire (see usNetworkGrabber::usVolumeField enum).

Definition at line 379 of file usNetworkGrabberRF3D.cpp.

stopAcquisition

void usNetworkGrabber::stopAcquisition ( )

slotinherited

Sends the command to stop the acquisition on the ulstrasound station. The server will stop to send data, but the grabber is still connected : you can then perform a runAcquisition() to tell the server to restart sending frames. The acquisition parameters will be kept.

Examples

tutorial-elastography-3D-acquisition.cpp, tutorial-ultrasonix-qt-grabbing-RF-scan-conversion.cpp, tutorial-ultrasonix-qt-grabbing-RF.cpp, tutorial-ultrasonix-qt-grabbing-RF3D.cpp, tutorial-ultrasonix-qt-grabbing-post-scan-bi-plan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan.cpp, tutorial-ultrasonix-qt-grabbing-post-scan3D.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence-control.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan-confidence.cpp, tutorial-ultrasonix-qt-grabbing-pre-scan.cpp, and tutorial-ultrasonix-qt-grabbing-pre-scan3D.cpp.

Definition at line 669 of file usNetworkGrabber.cpp.

References usNetworkGrabber::runAcquisitionSignal().

Referenced by usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), usNetworkGrabber::sendAcquisitionParameters(), and usNetworkGrabber::~usNetworkGrabber().

stopRecording()

void usNetworkGrabberRF3D::stopRecording

(

)

Stop recording process.

Definition at line 373 of file usNetworkGrabberRF3D.cpp.

Member Data Documentation

m_acquisitionParameters

usAcquisitionParameters usNetworkGrabber::m_acquisitionParameters

protectedinherited

Definition at line 211 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::getFramesPerVolume(), usNetworkGrabber::getImageDepth(), usNetworkGrabber::getImagingMode(), usNetworkGrabber::getMotorActivation(), usNetworkGrabber::getMotorPosition(), usNetworkGrabber::getPostScanHeigh(), usNetworkGrabber::getPostScanMode(), usNetworkGrabber::getPostScanWidth(), usNetworkGrabber::getSamplingFrequency(), usNetworkGrabber::getSector(), usNetworkGrabber::getStepsPerFrame(), usNetworkGrabber::getTransmitFrequency(), usNetworkGrabber::readAcquisitionParameters(), usNetworkGrabber::sendAcquisitionParametersSlot(), usNetworkGrabber::setFramesPerVolume(), usNetworkGrabber::setImageDepth(), usNetworkGrabber::setImagingMode(), usNetworkGrabber::setMotorActivation(), usNetworkGrabber::setMotorPosition(), usNetworkGrabber::setPostScanHeigh(), usNetworkGrabber::setPostScanMode(), usNetworkGrabber::setPostScanWidth(), usNetworkGrabber::setSamplingFrequency(), usNetworkGrabber::setSector(), usNetworkGrabber::setStepsPerFrame(), usNetworkGrabber::setTransmitFrequency(), and usNetworkGrabber::usNetworkGrabber().

m_bytesLeftToRead

int usNetworkGrabber::m_bytesLeftToRead

protectedinherited

Definition at line 208 of file usNetworkGrabber.h.

Referenced by usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), dataArrived(), and usNetworkGrabber::usNetworkGrabber().

m_confirmHeader

usInitHeaderConfirmation usNetworkGrabber::m_confirmHeader

protectedinherited

Definition at line 217 of file usNetworkGrabber.h.

Referenced by usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), dataArrived(), and usNetworkGrabber::usNetworkGrabber().

m_connect

bool usNetworkGrabber::m_connect

protectedinherited

Definition at line 204 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::connectToServer(), usNetworkGrabber::disconnectFromServer(), usNetworkGrabber::processConnectionToServer(), and usNetworkGrabber::usNetworkGrabber().

m_imageHeader

us::usImageHeader usNetworkGrabber::m_imageHeader

protectedinherited

Definition at line 218 of file usNetworkGrabber.h.

Referenced by usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), dataArrived(), and usNetworkGrabber::usNetworkGrabber().

m_ip

std::string usNetworkGrabber::m_ip

protectedinherited

Definition at line 205 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::processConnectionToServer(), and usNetworkGrabber::usNetworkGrabber().

m_isInit

bool usNetworkGrabber::m_isInit

protectedinherited

Definition at line 221 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), and usNetworkGrabber::usNetworkGrabber().

m_isRunning

bool usNetworkGrabber::m_isRunning

protectedinherited

Definition at line 222 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), usNetworkGrabber::sendAcquisitionParameters(), usNetworkGrabber::sendRunSignal(), and usNetworkGrabber::usNetworkGrabber().

m_tcpSocket

QTcpSocket* usNetworkGrabber::m_tcpSocket

protectedinherited

Definition at line 203 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::connected(), usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), dataArrived(), usNetworkGrabber::disconnect(), usNetworkGrabber::disconnected(), usNetworkGrabber::disconnectFromServer(), usNetworkGrabber::handleError(), usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), usNetworkGrabber::processConnectionToServer(), usNetworkGrabber::sendAcquisitionParametersSlot(), usNetworkGrabber::sendRunSignal(), usNetworkGrabber::usNetworkGrabber(), usNetworkGrabberPostScan2D::usNetworkGrabberPostScan2D(), usNetworkGrabberPostScanBiPlan::usNetworkGrabberPostScanBiPlan(), usNetworkGrabberPreScan2D::usNetworkGrabberPreScan2D(), usNetworkGrabberPreScan3D::usNetworkGrabberPreScan3D(), usNetworkGrabberRF2D::usNetworkGrabberRF2D(), usNetworkGrabberRF3D(), and usNetworkGrabber::~usNetworkGrabber().

m_thread

QThread* usNetworkGrabber::m_thread

protectedinherited

Definition at line 225 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::runAcquisition(), usNetworkGrabber::usNetworkGrabber(), and usNetworkGrabber::~usNetworkGrabber().

m_updateParametersSucess

bool usNetworkGrabber::m_updateParametersSucess

protectedinherited

Definition at line 214 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), usNetworkGrabber::sendAcquisitionParameters(), usNetworkGrabber::sendAcquisitionParametersSlot(), and usNetworkGrabber::serverUpdated().

m_verbose

bool usNetworkGrabber::m_verbose

protectedinherited

Definition at line 200 of file usNetworkGrabber.h.

Referenced by usNetworkGrabber::connected(), usNetworkGrabberPostScan2D::dataArrived(), usNetworkGrabberPostScanBiPlan::dataArrived(), usNetworkGrabberPreScan2D::dataArrived(), usNetworkGrabberPreScan3D::dataArrived(), usNetworkGrabberRF2D::dataArrived(), dataArrived(), usNetworkGrabber::disconnected(), usNetworkGrabber::initAcquisition(), usNetworkGrabber::initAcquisitionSlot(), usNetworkGrabber::processConnectionToServer(), usNetworkGrabber::readAcquisitionParameters(), usNetworkGrabber::sendAcquisitionParametersSlot(), and usNetworkGrabber::usNetworkGrabber().